Simply enter the Quench shower and begin to efficiently wash your body using soap & shampoo and rinse off thoroughly. This can be achieved in about 2 minutes using around 20 litres of water. Once the soapy water has disappeared down the drain, push down the drain cover and allow the reservoir to fill (approximately 4 litres (1 gallon) of clean temperature-controlled water). Turn the shower off.
Activate the Auto-Mode and the water will re-circulate continuously through the shower for as long as you like. The water is filtered, pressurised and heated to the temperature that is set by the user at the control panel – using only 4 litres (1 gallon)!
Source: quenchshowers.comAdded: 22 January 2009